Features & Benefits
Good adhesion
Good durability
Easy to apply
Excellent coverage
Easy to spray
PAYNTOXY MP PRIMER is a two-pack polyamide cured multipurpose epoxy coating. It gives excellent and corrosion protection. It has high content and quality pigments and produces a continuous paint film after dry, cures through a wide temperature range, resists high humidity and moisture and excellent adhesion protects the surface from moisture penetration.
Typical uses: For concrete surfaces such as chemical plant, port facilities, new cement, brick, masonry surfaces, unpolished granite, sandstone and flooring application primer.
Surface Preparation
Prior application of HEAVY DUTY MP PRIMER.
Coating performance, in general is proportional to the degree of surface preparation. Surface generally must be clean, dry and free from any loose material, dirt, grease, wax or other contaminants and must be thoroughly dried before application.
Painted surface: For a strong preceding coat, light sanding is recommended. Then the surface must be thoroughly cleaned, dried and free of all loose, dirt, dust, oil stain and other contaminants before paint application.
| Color | Light grey |
| Film Finish | Matt |
| Drying Time | Touch dry 1-2 hours |
| Recoating Interval | ≥ 8 hours |
| Theoretical Coverage | Approximately 5 – 8 m² / liter (depends on surface conditions) |
| Coats | 1 or 2 Coats |
| Application | Brush, roller, air spray or airless spray |
| Thinner/Cleaner | Use Paynthinner 12 |
Safety, Health and Environment
During painting, make sure no source of ignition at surrounding and no smoking. Always remember to use protective equipment especially eye-goggles and a face mask to cover the mouth and nose. Remember to ensure adequate ventilation in rooms you are painting – open windows and doors wherever possible. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. When not in use, store paint in cool and shaded place and do not directly expose sunlight. Do not dispose paint into drains or watercourses. Wash your hands after use.
Refer to PAYNT Technical Data Sheet (TDS) for further details. - click button for pdf
Safety Data Sheet (SDS) is available upon request.
Photo gallery
PAYNTOXY finish is a two-pack polyamide cured epoxy finishing and intermediate coating. It has high content quality pigments produce a continuous paint film after dry and cures through wide temperature range...
Enquiry Now
Reach out to us via our contact form below and we will get back to you as soon as possible!