Features & Benefits
Fast Dry
Abrasion Resistance
PACRYLIC RL is a modified acrylic-chlorinated rubber solvent-based paint that has excellent resistance to wear and tear for road markings such as edge lines, centerlines, zebra crossing, road curbs, speed humps and many more. It is fast-drying and has excellent outdoor durability and abrasion resistance.
Typical uses: Such as cement, pavement brick, concrete, masonry surfaces, asphalt, Lining/marking of roads, runways, car parks, warehouses, safety areas, and exterior or interior use.
Surface Preparation
Prior application of PAYCRYLIC RL:-
New surface: Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease, etc. Not recommended for fresh asphalt. Test area is recommended before work is commenced.
| Color | Yellow, White, black, refer PAYNT HEAVY DUTY PROTECTIVE COATINGS color cards |
| Film Finish | Matt |
| Drying Time | Touch dry 15 - 20 minutes |
| Recoating Interval | Minimum 50 minutes |
| Theoretical Coverage | Approximately 5 – 7 m² / liter (depends on surface conditions) |
| Coats | 2 Coats |
| Application | Brush, roller, air spray or airless spray |
| Thinner/Cleaner | Use Paynthinner 12 |
Safety, Health and Environment
During painting, make sure no source of ignition at surrounding and no smoking. Always remember to use protective equipment especially eye-goggles and a face mask to cover the mouth and nose. Remember to ensure adequate ventilation in rooms you are painting – open windows and doors wherever possible. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. When not in use, store paint in cool and shaded place and do not directly expose sunlight. Do not dispose paint into drains or watercourses. Wash your hands after use.
Refer to PAYNT Technical Data Sheet (TDS) for further details. - click button for pdf
Safety Data Sheet (SDS) is available upon request.
Photo gallery
PAYNTOXY finish is a two-pack polyamide cured epoxy finishing and intermediate coating. It has high content quality pigments produce a continuous paint film after dry and cures through wide temperature range...
Enquiry Now
Reach out to us via our contact form below and we will get back to you as soon as possible!