Features & Benefits
Good adhesion
Good durability
Anti-slip
Excellent coverage
PAYNTOXY ANTI-SLIP finish is a two-pack polyamide cured epoxy finishing with an anti-slip agent. It has high content, quality pigments, produces a continuous paint film after drying and cures through a wide temperature range. It gives excellent corrosion protection and it is suitable to be applied on indoor concrete substrates where adhesion to concrete is crucial and abrasion resistance is required.
Typical uses: Industrial and commercial floor, car park decks, garage, warehouse, pedestrian area and industrial plant sectors where chemical resistance is required.
Surface Preparation
Prior application of PAYNTOXY :
New surface: Surface generally must be clean, dry and free of all loose, dirt, oil stain and other contaminants before paint application. Surface affected by rust must be thoroughly cleaned and primed with Heavy Duty MP Primer or Payntoxy 134 Primer before finishing coat.
Painted surface: For a strong preceding coat, light sanding is recommended. Then the surface must be thoroughly cleaned, dried and free of all loose, dirt, dust, oil stain and other contaminants before paint application.
| Color | Wide range, refer PAYNT HEAVY DUTY PROTECTIVE COATINGS color cards |
| Film Finish | Roughness |
| Drying Time | Touch dry 1-2 hours |
| Recoating Interval | ≥ 8 hours |
| Theoretical Coverage | Approximately 4 – 8 m² / liter (depends on surface conditions) |
| Coats | 1 or 2 Coats |
| Application | Brush, roller, air spray or airless spray |
| Thinner/Cleaner | Use Paynthinner 12 |
Safety, Health and Environment
During painting, make sure no source of ignition at surrounding and no smoking. Always remember to use protective equipment especially eye-goggles and a face mask to cover the mouth and nose. Remember to ensure adequate ventilation in rooms you are painting – open windows and doors wherever possible. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. When not in use, store paint in cool and shaded place and do not directly expose sunlight. Do not dispose paint into drains or watercourses. Wash your hands after use.
Refer to PAYNT Technical Data Sheet (TDS) for further details. - click button for pdf
Safety Data Sheet (SDS) is available upon request.
Photo gallery
PAYNTOXY finish is a two-pack polyamide cured epoxy finishing and intermediate coating. It has high content quality pigments produce a continuous paint film after dry and cures through wide temperature range...
Enquiry Now
Reach out to us via our contact form below and we will get back to you as soon as possible!